Tianqiong Sensor IOT Technology Co., Ltd
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China

Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China

Model:FT-F2
Brand:tianqiong
1.Product Introduction to Weather Sensors for Drones
Weather Sensors for Drones are lightweight, rugged and highly accurate,can be mounted on drones to collect data about local weather conditions.The F2 Weather Sensors for Drones is a weathermeter that utilizes the principle of ultrasonic resonance.It is specially designed to be installed on small aircraft and on unmanned platforms to monitor wind speed, wind direction, temperature, humidity and atmospheric pressure values in low-altitude areas.
The weight of F2 is 56g and a diameter of 50mm.It is currently a lighter and smaller ultrasonic meteoroscope on the market.It has a compact and solid appearance, and has extremely strong anti-electromagnetic interference, waterproof and dustproof functions.It can work normally at an altitude of 4,000 meters and the external environment between -40℃ and +70℃.
It uses low-power chips internally, and can measure wind up to 60m/s, especially for unmanned aircraft and related flight control platforms, as well as environmental monitoring systems using aircraft.
F2 has two installation methods, which can be mounted on the top of the aircraft and can be mounted upside down on the bottom of the aircraft.
2.Weather Sensors for Drones technical parameters
| name | Measurement range | Accuracy | Resolution |
| Wind speed | 0-60m/s | ±3% | 0.1m/s |
| wind direction | 0-359° | ±3° | 1° |
| temperature | -40-+80℃ | ±1℃ | 0.1℃ |
| humidity | 0-100% | ±5% | 1 |
| Air pressure | 300-1100hpa | ±1 | 0.1hpa |
| Instrument diameter | 50mm | ||
| Instrument height | 50mm | ||
| Instrument weight | 56g | ||
| Digital output | RS485 | ||
| Baud rate | 4800-19200 | ||
| Communication protocol | ModBus, ASCII | ||
| Operating temperature/humidity | -40℃-+70℃; 0-100% | ||
| Working Altitude | 0-4000 meters | ||
| Power requirements | VDC: 5-24V; 28mA | ||
| Installation method | Top column installation or bottom lifting of aircraft | ||
| Material/Color | ABS/Black | ||
Modular Weather Station is a high-precision, automated meteorological observation device that integrates the measurement of multiple parameters—including wind speed, wind direction, temperature, humidity, atmospheric pressure, PM2.5, PM10, and noise—into a single unit. Characterized by its c...
Instrument for measuring water flow velocity consists of a propeller-type flow velocity sensor, a flow velocity calculator, and a measuring rod. It features a velocity measurement range of 0.06 to 8.00 m/s and a measurement error margin of ≤1.5%. Once the signal cable is connected, the device...
The online water quality monitoring system, based on IoT technology, consists of units such as flow stabilization and venting, analytical monitoring sensors, system control, and remote communication. It integrates sensors for residual chlorine, pH, water temperature, turbidity, and conductivit...
This system is a fully automated online hydrological monitoring device built on microwave technology. Equipped with K-band planar radar technology, it accurately monitors water data using a non-contact acquisition method. Adaptable to various water conservancy scenarios, it features anti-inter...