Tianqiong Sensor IOT Technology Co., Ltd
Sales Manager：Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email：info@fengtutec.com
Add：No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
PRODUCT CENTER
-
Weather station
-
Hydrological Monitor
-
Water Quality
-
Agricultural Weather Stations
-
Road Weather Station
-
PV Weather Station
-
Environmental monitoring
-
Virus Detection
-
Operating condition monitoring
Recommended articles
- The hydrological station monitoring system uses non-contact radar technology to measure flow
- Handheld anemometers measure wind speed and direction using the ultrasonic time-of-flight method
- Integrated GNSS devices achieve millimeter-level deformation monitoring through differential RTK
- handheld anemometer can simultaneously measure wind speed, wind direction, temperature, humidity, and provide location and distress signal capabilities
- PCR Machine Enables Simultaneous Detection of Two Targets in a Single Reaction Well
- Handheld Weather Station for Fire Emergency Use Ensures Meteorological Monitoring at Disaster Sites
Contact us
Conductivity Meter
Model：FT-SS7
Brand：tianqiong
Conductivity Meter is used to measure the conductivity of water or solution and is used to monitor the amount of nutrients, salts or impurities in hydroponics and aquaculture.
Get a Free Quote- Product details
- Related products
- Related articles
1.Introduction to Conductivity Meter Products
Conductivity Meter is used to measure the conductivity of water or solution and is used to monitor the amount of nutrients, salts or impurities in hydroponics and aquaculture.SS7 model Conductivity Meter is an electrode method water quality analysis instrument that uses all digital electrode detection to detect water quality conductivity parameters.The instrument is equipped with a self-developed FTIOT operating system, which has simple operation, stable performance, accurate measurement, wide detection range, and has a built-in high-capacity rechargeable lithium battery, which is convenient for users to conduct water quality inspection at any time in the field and in the laboratory.
2.Conductivity Meter host parameters
| Charging input voltage | 4.5V-5.5V |
| Charging current | ＜2A |
| Screen size | 3.5 inches |
| Screen resolution | 480*800☆ |
| Screen interface | MIPI DSI☆ |
| USB port | 2 (Support external expansion of mouse, keyboard, 4G, etc.)☆ |
| Type-C | 1 (Support external expansion of mouse, keyboard, 4G, etc.)☆ |
| RS485 | 2 (Support Modbus, json, asc input, etc.) |
| External sensor power supply voltage | 12V |
| External sensor power supply current | 1A |
| operating system | ftiot (based on Linux-5.4)☆ |
| CPU | 2*Cotex-A7, 650Mhz☆ |
| RAM | 512M DDR3☆ |
| Flash | 8G-64G |
| OpenGL | ES 2.0☆ |
| Wifi | support |
| 4G | Selection |
| button | support |
| Capacitive touch screen | support |
| Software Architecture | B/S☆ |
| Web access | Support ☆ |
| MTP mode | Support ☆ |
| Multi-terminal login | Support ☆ |
| IPV6 | Support ☆ |
| Sensor communication method | RS485, TCP, UDP, Http☆ |
| Data forwarding method | RS485, TCP, UDP, Http☆ |
| Remote SSH | Support ☆ |
| Remote debugging | Support ☆ |
3.Conductivity Meter sensor parameters and configuration
| Serial number | name | Measurement range | principle | Measurement accuracy | Configuration | Remark |
| 1 | temperature | 0~50℃ | High-precision digital sensor | ±0.3℃ | ||
| 2 | pH | 0~14 (ph) | Electrochemistry (salt bridge) | ±0.1PH | ||
| 3 | ORP | -1500mv~1500mv | Electrochemistry (salt bridge) | ±6mv | ||
| 4 | Conductivity | 0~5000uS/cm, 0~10000uS/cm | Contact electrode method | ±1.5% | ✔ | |
| 5 | TDS | 0～20μS/cm (TDS 0-10mg/L) | Contact electrode method | ±1.5% | ||
| 6 | salinity | 0-2.5ppt or 0-80ppt | Contact electrode method | ±0.05ppt or ±1ppt | ||
| 7 | Sludge concentration | 0～20.000g/L | Scattering light method | ±5% (depending on sludge homogeneity) | ||
| 8 | Turbidity | 0~40NTU (low turbidity) | Scattering light method | ±1% | Optional | |
| 0~1000NTU (medium turbidity) | Scattering light method | ±1% | ||||
| 0~3000NTU (high turbidity) | Scattering light method | ±1% | ||||
| 9 | Dissolved oxygen | 0~20mg/L | Fluorescence life method | ±2% | ||
| 10 | Ammonia nitrogen | 0-1000.00mg/L (default) 0-100.00mg/l/ (customizable) | Ion Selection Electrode Method | 10% of reading, ±0.5℃ | ||
| 11 | Suspension | 0~2000mg/L | Scattering light method | ±5% (depending on sludge homogeneity) | ||
| 12 | Residual chlorine | 0~5.00mg/L | Ion Selection Electrode Method | ±5% of reading | The best accuracy is when the flow rate is 0.42m/s-0.85m/s | |
| 13 | Chloride ions | 0-3500.0mg/L | Ion Selection Electrode Method | ±5% | ||
| 14 | Total hardness | 0～1000.0mg/L | Ion Selection Electrode Method | ±10% of reading | ||
| 15 | cod | 0~500mg/L | UV254 absorption method | ±5% | COD and chlorophyll have automatic cleaners, which can prevent biological adhesion and avoid light window contamination, so as to ensure that long-term monitoring is still stable; automatic cleaning time and cleaning times can be set, and the power consumption is 0.7W | |
Address:https://www.tianqiongsensor.com/Portable-Water-Quality-Monitor/Conductivity-Meter.html
Previous Article ：ORP Meter
Next Article：Dissolved oxygen meter
-
05-282025
Weather Sensors for Drones: FT-F3 Enables Aerial Precision
In the field of meteorological monitoring, traditional monitoring methods have limitations in specific geographical environments. Ground-based equipment is restricted by terrain and difficult to achieve comprehensive coverage; while satellites can provide macro-level monitoring, they lack precision...
-
09-102025
Ultrasonic Weather Station: An Essential Automated Component in Meteorological Observation Networks
Within the meteorological observation system, meteorological stations encompass various types such as National Climate Observatories, National Reference Climate Stations, National Basic Meteorological Stations, National Meteorological Observation Stations, and Regional Automatic Meteorological Stati...
-
03-242026
Corn GMO Detector Ideal for Field and Seed Screening Applications
Corn GMO Detector is a specialized solution custom-designed for maize. Based on real-time quantitative fluorescence technology, the system consists of a 4-channel, 16-well real-time quantitative PCR instrument and a portable accessory kit. It enables rapid and precise detection of transgenic c...
-
10-282025
Grid-Based Air Quality Monitoring Stations: Technology, Advantages and Applications" Chinese
As environmental pollution becomes increasingly complex, the limitations of traditional air monitoring methods are gradually becoming apparent. The national ambient air monitoring network has a limited number of stations and high costs, and the method of using points to represent the whole area resu...
Hello, my friend！
What kind of support do you need? Our products is sure to satisfy you.
What kind of support do you need? Our products is sure to satisfy you.
Skype
whatsapp
mail